HP Vs17 17" LCD Flat Panel Monitor "bd" Questions

...it? It sounds like the T-CON board (part of the LCD panel) is not getting the +5vdc from the logic bd. Check the ribbon cable between the panel and the logic bd. first, then check to see if it has ...

...screen the monitor turns on, but the screen is just white. Check the ribbon cable on the T-CON BD and the Logic bd. http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/ Also check all the ...

...the screen glowing without any pictures, you need to check the ribbon cable at the LCD panel T-CON bd. http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/ Hopefully it did not blow the fuse

...power supply, that will be the first thing to check, also verify htat you do have 5vdc for logic bd and 12~18vdc for inverter bd. http://s807.photobucket.com/home/budm/allalbums

...you would think it was having a disco on its own Check the caps in the power supply/inverter bd. and on the logic bd. first. Most common failures in the LCD monitors are bad capacitors

...that powers up but has a bad raster board which displays vertical gray bands on the screen. power bd,inverter bd case, screen,and control bd are all in good cond.I may be able to get you a value on ...

...glow without any pictures, you need to look at the ribbon cable that is connected between the Logic bd and the LCD panel, try reseating them, see pictures here: ...

.lcd tv not working i have a sharp lcd tv model LC-30HV4U that was dead , on replacing power bd. the red led comes but the tv does not come on cold solder on micro panel fixed mytv

...already turn off the Lock function and it still comes on, then you may have problem in the logic bd. (EPROM is scrambled, or bad power +5vdc feeding the logic bd.).

...white When the screen goes white, it can be that it is not gettin the 5vdc to the LCD panel T-CON bd, or the broken cable between the mother bd and the LCD panel, check connection at both ends. ...