Question about HP LaserJet Office Equipment & Supplies
...error correction is in use for the fax session, disable ECM Disable V.34 on local machine V.34 is the modem protocol used by the product to send faxes. It is the worldwide standard for full-duplex ...
Question about HP LaserJet Office Equipment & Supplies
...error messages. Tried T.30 Protocol Trace which shows0.00 OFFHOOK, 6.49 CNG and 10.00 ONHOOK. No other information. A new fax machine works well on the dedicated line, so I believe the problem is in ...
...error 227 for changing to a slower speed or disabling V.34 .) Disable V.34 on local machine V.34 is the modem protocol used by the product to send faxes. It is the worldwide standard for full-duplex ...
Question about HP LaserJet Office Equipment & Supplies
...Protocol Trace Report with the "Type: Receive" and "Result: Communication Error (17)". How do we figure out what this means? Thnaks. If this is printing out and consuming a lot of ...
error 209 - Media Table Download Failure MediaTable Download to PU failed. Reboot. CU firmware detected an anomaly in behavior in PU (including a violation of communication protocol between CU and PU)
...error no matter who I fax to... Your fax transmission protocols might be set to a non-standard. Go through the fax menu and try to reset. You may also have a dial out setting, added or missing, an ...
Question about HP LaserJet Office Equipment & Supplies
...error message "erreur 344" or 345 or sometimes 356 or 358. When I expect to receive it is also often wrong. The facsimile (HP OfficeJet 6210) works nicely from or to other desinations. Why? Probably ...
Question about Dell Office Equipment & Supplies
...Protocol dump list) is different at various times. It varies from 300 bos to 14.4 kbps. Another error I noticed from the Technical Menu >Error Information Report is "CRU FUSE ERROR". I am unable to ...
...Hi Paikin, The error code 100 - Excessive Repeat Protocol during Transmission. Causes 1. Poor line condition. 2. Low transmission level. 3. Echo on the line. Try reducing transmission spped. Rgs ...
fax error There was an error on the other end of the transmission....REMOTE=THEM (not you...you would be LOCAL). There may be communication problems between the two units and they can't agree on their
28 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions