Question about HP OfficeJet Office Equipment & Supplies
...grinding noise continues, Unplug the power cable from back of printer ( while printer is on ) and while holding the # and 6 button, connect it back. It should go thru alignment process and the ...
Question about HP OfficeJet Office Equipment & Supplies
noise when powering on, perhaps when attempting to do a carriage return. Could someone assist me? Thank you. yes, that is a carriage jam and not paper, the grinding is from the clean station that gets
...grinding noise & locks up. Hi, this issue could little complicated, that happens becoz there would be a lubricating coat on the carriage rod to it to move freely. if thats gone u would have this kind ...
Question about HP OfficeJet Office Equipment & Supplies
...grinding noise resulting in a stall My 7130 has started to occassionaly make a gears grinding sort of noise when attempting to print. It does this when the print/ink cradle is in the far right ...
grinding noise as it's motor tries to drive the sled back and forth. If the encoder strip is dirty the printer may not see all the lines and detect an error, often when the strip is dirty the carriage
Question about HP OfficeJet Office Equipment & Supplies
...grinding noise and won't move when the lid is opened this means that no function (even including faxing) can be done. Any ideas. I have tried most of the obvious things. The scanner failure prompt is ...
...grinding noise when you turn the power on. This noise is normal. Open the print carriage access door by lifting the handle until the door locks in place. The print carriage moves to the center. Wait ...
Question about HP OfficeJet Office Equipment & Supplies
...grinding noise or makes unusual noise, Turn off the printer and open the rear access door. Clean the rollers with lint free cloth. Close the door. Open the front access door and check if the carriage ...
...grinding noise. When I open the carriage and watch what is happenig, I see a washer with teeth going around. I am not sure if this is the problem or not, because until the noise I never paid any ...
grinding noise. There was no binding or obstruction...then i saw an object on the far left...I guess it was confusing the sensor, so it thought the carriage was over there, and tried to move it to the
117 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions