HP LaserJet 4mv Printer "close fuser cover" Questions

...handles on the fuser. 4. Remove the old fuser from the printer. 5. Install the new fuser. 6. Close the top cover. ...

...fuser. Turn the power off and unplug the printer. Wait 20 minutes for the printer to cool. Open the back door of the printer, using enough force that the door opens completely and the hinge locks ...

...close the top cover. 2. Open read door and pinch blue latches on fuser and pull it out. Inspect the sensor flag for correct movement and any paper obstructions in the fuser rollers. Re-install fuser ...

...tray. try checking your top cover sensor. close it and wait for the printer warm up. the black plastic you saw was part of your fuser sleeve. if paper jam always occur try replacing your fuser ...

...close the lid. -Lastly there could be something going on with the fuser(might not be installed correctly) The fuser is what melts the toner to the paper. To remove the fuser, power off the machine, ...

...fuser access. 13.09.00 Jam in top cover area. We have never experienced this problem before. Everytime I remove the paper another one jams Either you have a problem with the fuser itself, such as a ...

...occured while giving the cammand there is a lever in the top vover to close the cover sensor, and it may be broken or bad seated change ur printers teflon flim (fuser flim) or ur printers need ...

...Close the top cover. Attention error. The printer is out of media. Load media. Attention error. The printer has a jam. 1. Clear the jam (see pages 164 through 168). 2. If the location of the jam is ...

...close fuser access and levers close front covers. what is the problem. How solve this problem? This error comes when media doesn't come to fuser delivery sencor with in the specified time it may be ...

...fuser to replace it then i close the front cover of the printer now ready to put in the new one I realise I cant open the front cover cause the little lever that you press to open it is on the fuser ...