Question about HP LaserJet Office Equipment & Supplies
...command. how to fix the problem? iam using hp5000n laser printer. It is giving 13.1 &13.3 error messages freequently. (This is paper jaming
Question about HP LaserJet Office Equipment & Supplies
...message and cannot open the paper tray or find any other jam.. Hello, The error 41.3 is unexpected paper length and was caused by the printer pulling more than one sheet. Now the problem is clearing ...
Question about HP LaserJet Office Equipment & Supplies
...paper jam error message but I looked underneath the cartridges where they sit to the right and I said I'm going to clean the thing that's sitting underneath the cartridges covered with ink. I went to ...
Question about HP LaserJet Office Equipment & Supplies
message that there is a paper jam in the front door, there is no jam. I open and close the front door and then it says the jame is in the fuser, ive taken that out and no jam hp 3550 laser printer not
Question about HP LaserJet Office Equipment & Supplies
...paper jam it said open the back door to clear the jam i did what it said i put the door back but now i get the door is open message Try this. Open up the printer and remove the cartridge. next, lift ...
...paper jam message comes back-- this is a L7780 printer It sounds like the paper sensor in the paper try is broken or jamed. Remove the paper tray and locate the paper sensor. Check if it is jamed in ...
...Paper jamed Somewhere inside your printer is a tiny piece of paper that is causing it to send you that error message. Break out a flashlight, remove your paper and cartridges and search
Question about Canon Office Equipment & Supplies
...paper. message says "paper jamed" but there isno paper jamed.How do I fix this paper jam lit when jammed or feeding does not occurs, try cleaning the feed rollers and look if the feed rollers rotates ...
Question about Canon Office Equipment & Supplies
...beaneath the bypass are small door, open it and check for paper jams. Be sure that you closed them properly because if they arent closed the check printer cover message will arrise. Hope that ...
paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor
549 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions