Question about HP ScanJet Office Equipment & Supplies
how do you clean the glass from the inside of the unit You have to disassemble the top to get to the back of the glass. Not hard to do, just be careful. It MAY require a special tool like a Torx ...
HP imaging device could not be initialized because of lamp error. Does the lamp in the scanner come on at all? If not, then it is most likely bad. You can try disassembling the scanner and check that ...
does not detect computer does not detect my scanner hpscanjet 3200c First of all you have to uninstall your scanner software completely and to restart your computer with the scanner disconnected. ...
Question about HP ScanJet Office Equipment & Supplies
...tell if you have power at the tip If attached or detacable power cord (NO "brick", you''ll have to disassemble to ...
Disassembly of HP ScanJet 4470c. I want to clean my scanner inside, but I can't... How to take apart a HP SJ 4470c? I can't disconnect glass after removing two screws... :( You remove the panel that ...
Question about HP ScanJet Office Equipment & Supplies
...How can i disassemble to open the Bottom or Base of HP Scanjet 2400. Because the guide to move the sensor ...
the 5470, but I would bet on it. If all else fails and you feel competent to try it, see if you can disassemble the bottom and look for the fuse. Usually sudden problems like this are really something
i want to disassemble the canon scanner LiDE 25 This link provides the Users Manual from Canon, showing some views into the device, and a little disassembly, but is not a service manual: ...
...the scanner are clean. Next step is to clear both CCD's (read heads) but in this case you need to disassemble the
fi 6000ns beeping Just went through this. Unit is a mini-ITX pc w/ custom pwr supply, screen, and a cute little USB keyboard. Not going to get into into the disassembly w/ this answer, but the bottom ...
21 questions posted
Usually answered in minutes!
244 Questions
109 Questions
80 Questions
73 Questions
80 Questions