...black line on the back. Cleaning the ink off the roller only fixes the problem until the next time the printer primes itself again. Also, it's not easy to clean the roller between the moment the ...
ink just mainly the black and i just purchased my printer a few months ago now when i go to print it says i am out of ink Hi Most inkjet printers have a priming pump underneath where print head rests.
...ink sensors. Black, Cyan, and Yellow are still completely full - I can feel the weight of the ink in them, but the machine insists they're empty. Does it need a new main board, or am I ...
Question about Dell Office Equipment & Supplies
...prime the yellow ink and got it flowing throughthe head again but it's still mixed with black... I wonder if you may have runout of magenta and dried the head... Try priming the magenta ink by ...
Question about Dell Office Equipment & Supplies
...black line beneath that. Sounds like a bad ink cartridge. The ink is probably clogged up in the print head where the ink comes out of the cartridge. You should either bring it back to where you ...
...ink (for black color) or compatible with water based ink (color printheads) during reassembly - don't forget to fill the printhead with ink (2/3 of its volume) Ridiculous anwer! do you think That ...
Question about Dell Office Equipment & Supplies
black print head twice, the first new print head would align and then fail the color calibration, the second new head aligns and pass's color calibration, but when I try to print it says replace print
...The black side was clogged with old semi-dry ink. After removing the hose from the pump, and soaking it in hot water for about 15 minutes I was able to squeeze out the old ink, now it works like
Question about Dell Office Equipment & Supplies
...and put a new print head in still no black If you did put in a new printhead, it means you need a new purge, or cleaning assembly. If it doesn't clean and prime the printhead properly, it won't
black and colour ) - ink just not going onto paper?. Is there something else I should be doing to get printer working. You probably need a new purge assembly, it draws some ink to both clean and prime
676 questions posted
Usually answered in minutes!
995 Questions
608 Questions
501 Questions
509 Questions
441 Questions