...Most likely some of the gum (or even part of a label) has stuck to the inside of the paper feed mech. It all depends on where it is. You could try giving the inside of the feed hopper a good
jam. I can print on CD/DVDs fine but it wont feed paper. PLEASE HELP!! First of all turn the printer off & disconnect all of the cables. Turn it over and give it a shake, you'll be amazed at what gets
is in the parked position (fully right). Position card in the feed hopper and push through the feed mech. Open the top and watch for the card to come through the printer. This should realign the lever
...jam and paper was torn when it was removed then there may be a fault with the paper sensor. The most likely scenario is that there is something holding the paper sensor in the active position. This ...
...jam prints off margins I maintain a large quantity of O'Neil RP 2000 printers and they frequently have head jams and print off of the margins. What can I do to repair and prevent these problems???? ...
...jam", remove rear cover and locate the swich in the mid section of the roller mech. It is a little flat piece of plastic that drops in the way of the paper but is pushed away when the paer is fed ...
...jam! I have ordered a fuser/roller kit to see if this fixes it but I am not sure if it is that as it has only done 33000 sheets. Let me know is you have any suggestions. Thanks. Kathryn you can ...
Question about HP Office Equipment & Supplies
...mech carriage jam 415 msg after power on. There is no jam, encoder strip replaced, PCA connectors and ribbon cable okay. Is the carriage rail clean, and lightly lubricated? Cheat the door switch and ...
Question about Epson Stylus Office Equipment & Supplies
...jam-1 error. Pl. check the lever-check the smps photo interrupter-check the mech alignment of the lever- also check the cart hold lever(left-right) pressure (found on top of the engine base).
...jam. I tried turning off the machine for a day, but when I turn it back on, the same message appears, and it cannot do anything. Any ideas? Thank you VERY MUCH! Bonnie can you move the move the ink ...
362 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions