check each toner cartridge to see if the rollers can be rotated. If its difficult to rotate a roller, then replace the cartridge. If you have a faulty cartridge you may see that the small white wheels
Question about Samsung CLP Office Equipment & Supplies
...rear. It is less than a year old, and don't want to have to replace it. Any suggestions? Hi, you may do a test print to show the result of your life spend on your OPC Drum. Press and hold the stop ...
Question about Samsung CLP Office Equipment & Supplies
...rear door). I don't know if it did anything or not, but I had everything out...and I'm trying to be complete. The final piece that helped, pay attention to the paper you open. This sounds a little ...
...check for foreign material or paper debris in the cassette or in the PF rear guide; - remove foreign material. If other solution fail, replace one off the following part - PF pick-up unit - Logic ...
Question about Kodak Office Equipment & Supplies
...to clear rear paper jam but there is no paper jam powered off and on removed rear feed replaced does same error the paper sensor is blocked i hope,try to unzip the printer and check the paper
...check the tension arms (front and rear) for breakage. If either of the arms is broken, replace it with a new one. Hello sir, When the Canon IR 3300 switchs on it displays the Error code E000012-0002 ...
...appeared because a tension arm (front or rear) of the ITB tension roller was broken. check the tension arms (front and rear) for breakage. If either of the arms is broken, replace it with a new
Question about Samsung CLP Office Equipment & Supplies
...COVER IS OPPEN SO PLEASE CLOSE THE BACK REAR COVER & CHECK THE PAPPER JAM IN REAR COVER & AFTER CLOSE THE REARE COVER THEN AFTER SEE THE ERROR YOU CHECK THE BACK COVER SENCER & SENCER ...
Question about Samsung CLP Office Equipment & Supplies
...Check the paper feed rollers: Remove the power cable from the rear of the unit. Open the rear access door. Rotate the paper feed rollers in an upward direction. Reinstall the rear access door. If the ...
Question about Samsung CLP Office Equipment & Supplies
...Check or reinstall the front (for C&M) or rear (for K&Y) synchronizing detector board. 4. Replace the front (for C&M) or rear (for K&Y) synchronizing detector board. 5. Replace the ...
133 questions posted
Usually answered in minutes!
951 Questions
374 Questions
221 Questions
110 Questions
74 Questions
