Question about Xerox Office Equipment & Supplies
...print quality- streaky lines across the page I've inserted a new colour cartridge and printed a Publisher document containing images, it has come out with streaky lines across the page. I have tried ...
PAPER FEED button while powering the printer ON Release button after powering printer ON Test is continuous, so turn off when printing is complete If the cart has any ink it will print 3 color lines &
Question about Xerox Office Equipment & Supplies
...PRINT HEAD, TAKE AN A4 SHEET OF PAPER CUT IT TO SIZE FOR THE POGO,BUT MAKE IT (3) THREE THIKNESSES THIK, FEED IT IN UNDER THE PRINT HEAD AND CLOSE LID, WHILE THE PAPER IS BEING EJECTED PUSH UP ON THE ...
...print head. But it dose have a drum. Are the streaks thin lines? Also, is only part of the copies fixed into the paper ( can you rub part of the copies OFF)? If you can rub off part of the copies - ...
...print quality paper... Thanks! this could also be as simple as going in to your device manager and refreshing the driver first, unplug the printer from power and PC, reboot pc and then power up ...
Question about Xerox Office Equipment & Supplies
...Sure Your Settings Are Accurate, As Far As Quality Of Print (normal-to-best). Check And See If You Paper Type Is Correct (Photo, Plain, Postcard...Etc. Only Thing That I Can Think Of? Hope It
...comes out, the printer will work fine again. This can also be caused when the upper cassette tray (for small paper stock / photo paper) becomes detached from the lower tray. There is a gear ...
Question about Canon Office Equipment & Supplies
print out after printing and feeding them back through the printer to save paper. The old paper picks up a charge when fed through the first time, pulls toner up the second like a magnet, and deposits
Question about Xerox Office Equipment & Supplies
print head on the printer try these steps , and if the printer get long without printing the changes of ink getting dried id high and resulting streaky printing or missing ink on the paper even if the
paper on the glass and press enter until it runs the shading adjustment. That is the scanner calabration. That can help. But most likely the mirrors and lass are hazy. Unlike an old copier where dirty
67 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions