Kenwood KAC-8452 Car Audio Amplifier "4 channel power amp" Questions

...4 CHANNEL KICKER AMP TO MY CAR. TWO MONTHS PAST AND I WANTED MORE POWER FOR MY SUB SO I DECIDED TO ADD ANOTHER AMP AND ANOTHER SPEAKER. ONE WEEK PAST MY 4 CHANNEL AMPLIFER STOP WORKING, NO MID-RANGE, ...

...channel amp. just be sure to set the x-over's to lpf for subwoofers. I checked the power ratings, and bridged at a 4 ohm load will give you 250 rms watts per sub, so thats enough to run most 10's or ...

...4 channel amp and the other a 2 channel amp. i can get the power light to come on the 4 channel but cant get any responce fromth 2 channel amp. also even though the power light is coming on no sound ...

4 channel amp btw. ???????????????? 200 X 4 does mean 200 watts times 4 channels. In other words each channel pushes out 200 watts. I believe u have a total output power of 800 watts but check with ur

...4 channel 1600 watt v-trek amp (can be bridged) and i want to connect two 1050 10" infinity subwoofers. When i connect the two subs in paralell the amp cuts out after about 15 minutes, so my question ...

4 in every channel at ( 8 ohms on evs) size 12" 10" 8" dont matter or all at 4 ohms on this txa 6004 amp at 8 ohms ran in (parallel) gives you now 4 ohms 2or 4 speakers in each channel ran in prallele

...4 ohm and i was wondering what amp to get for it..i prefer it ta be a kicker amp but i dont know which one ta get...i bought a 1800 max 2 channel power acoustik amp but the guy who installed it said ...

...you can bridge channels 3 and 4 to get increased power to your sub. You have a 4 channel amp - channel 1 and 2 go to your 3-way speakers up front, which leaves channel 3 and 4 available for your

...the watts is on amp 123W x 4 Channel Max. Power Output at 2 Stereo 70W x 4 Channel 0.1% THD at 2 Stereo @13.8V (RMS Continuous Power) 50W x 4 Channel 0.1% THD at 4 Stereo @13.8V (RMS Continuous

...4 channel modes, but I was wondering if it's possible to connect only 1 subwoofer. The head unit provides plenty of power for the other speakers so I don't wish to connect them. If I were to use this ...