Panasonic PT-56WXF95 56" Rear Projection Television "set timer remote control" Questions

set with remote, the timer indicator flashes but nothing else(volume, channel) changes.I have to unplug to shut of set. Does this sound like ballast or mother board? Thanks -Scott Do the ballast first

...timer menu if the set is in service mode, but the user's manual doesn't tell how to get there (I don't have that info either - it's in the service manual, which may be available online from a third ...

...set sleep timer to 30 Exit menus and tune to channel 124 Adjust volume to 0 Press volume down (VD) on control panel and red 'CHK' will appear in the upper left corner To toggle between Serviceman and ...

...set itself, not the remote) and the split button on the remote control simultaneously for atleast 5 seconds and you will get the message "Lamp timer has been reset to 0. Your welcome :) Push and hold ...

...set the SLEEP TIMER for "0" MIN. While the SLEEP TIMER information is still on screen, press the [DISPLAY] key and [VIDEO STATUS] key of the remote control unit at the same time to enter the SERVICE ...

set. Using the remote control press and release the sleep timer button when sleep timer displays timer equals zero immediately press the display and V. status buttons at the same time. If done quickly

...it back with no problem. You may have set the on/off timer with your remote control at one time or another. Check the user manual to make adjustments. You can turn off the auto timer if you wish

...Timer light continues to blink, what do I do to turn it on? I don't know if this is the situation with your TV or not. But that set can be locked up in such manner as it cannot be turned on using the ...

...off exactly at noon. You have a timer that has been accidently set by someone by the remote control. If you have an instruction amnual for the tv, it will tell you how to turn off the tv's

timer on sony grand wega 50WE620...press menu on remote control then go to the setting you will find the setup button then press setup you will see the lamp replacement-start----yes and menu... Thanks