Panasonic PT-47WX53 47" Rear Projection HDTV "turn line 2 model" Questions

...2 inch vertical blue line, an inch vertical turquoise line, and then a 6" white vertical line on the left side. on the right side of the black is a red then a yellow line, the same size as the other ...

...line and recomed to replace the Lamp. so I did replace the lanp. TV start working, video, audio was good two minutes later TV start with lines and turn off. I wait a minute and turn TV back on and ...

turn it on in tv mode. When I switch to component 2 the picture is okay ,but it seems to be locked in zoom mode,picture is large and extends beyond screen. I have tried resetting and turning off power

...turn the unit on let it shutdown then press the input and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a ...

...turn the tv on it comes on for about 2 seconds then turns off. The red standbuy light stays on it has not done that before. There is a white strip accross the screen before it turns off. If its a ...

...turn the unit on let it shutdown then press the input and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a ...

...turn the unit on let it shutdown then press the input and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a ...

...2" apart. I have tried putting it in DVD mode or other device, lines still same, have tried the reset button. Help!! I think that would be the digital video(formatter) board. Possible bad capacitor ...

...2 TO 3 MINUTES HORIZONTAL LINES APPEAR AND THEN SHUTS OFF THE LONGER I LEAVE IT OFF I GAIN A FEW MORE MINUTES,,,,,,,,,,,,THANKS FOR ANY HELP I CAN GET ON THIS. ALSO TURN ON WILL SHUT OFF SOME

...turn the unit on let it shutdown then press the input and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a ...