Sony KP-51WS500 51" Rear Projection Television "lights stand bottom tv" Questions

...lights for both stereo and timer/stand by. how can i fix this problem? i don't have any manual or TV orioginal remote. all i have is a universal remote. any help / assistance is greatly appreciated. ...

...pain of the cost... like me :( SONY GRAND WEGA KF-42SX300U TV WONT TURN ON .KEEPS FLASHING BETWEEN GREEN ON LIGHT AND RED STAND BY LIGHT THEN AFTER A WHILE THE LAMP INDICATOR AT THE BOTTOM LIGHTS ...

...stand-by and the lamp lights blink. Allowing the unit to rest for awhile and restarting it will result in another shut-off after some period of time. The fan appears to be running and I have cleaned ...

...bottom left of the TV (if you're standing in front of it). I took off the back and saw there's a voltage board there; do I need to replace it? If so, what is it and where can I get it? Ck LL030 and ...

...stand by" light blinks 4 times sony tech. support told me that the red blinking light (4) times ment that the t.v. was over heating but yet it had not been used all day! approx 9hrs.Could some one ...

...bottom once, "stand by/ temperature," goes once and shuts off then starts over and does the same thing. you have a bad board, maybe the power supply/deflection board, maybe the signal board, to ...

tv, turned the channel to an auxilary input (for a black screen), and slowly raised each of the 3 bottom screws one by one up clockwise until i could see a faint green, blue, or red line (depending on

...loose durring the repair and that you got the dm seated back in the tv right. Also what size caps did you put in? Tim trying to hang tv but don't know how too take apart the stand on the bottom of ...

...lights turn off and the screen pulses with a very dim light. Eventually the stand by light comes on again and the screen stops pulsing. When it is going through this cycle, pushing the power button ...

...bottom, but it did not help. It did not come with a stand, but sits on a flat wood stand, so I don't think I am blocking the two air vents. And I have it far from the wall so that would not be a ...