...without lubercante like a tuner wash from chemtronics or something like that. I've told peeps a million times , when you clean off a crt face apply the cleaner or spray on the cleaning cloth directly ...
...Change it (maybe is dry)solder all components i just told you in the last step. horizontal driver, transformer, etcremember:if a transistor is blowing with no reason (there is a reason: the collector ...
...Change the channel so it's all dark (tv is on) making the arch lines more visible. Turn the corresponding colour screw very very slowly just a bit until it disappears but not too far(i forget which ...
...Channel +/- will change the "P" value. P1 - 3 are error codes. If there is a problem with the set that can be self-diagnosed, the "V" will report the code. These codes are available in the RCA repair ...
...channel or Aux Input. A signal must be applied to the set when performing convergence. If any Customer Adjustments need to be made, the Menu button can be used to toggle between the Customer Menu and ...
...Channel 124. Adjust VOLUME to minimum (0). Press VOL ← (decrease) on receiver. Red ?CHK? appears in upper corner. To toggle between aging and service modes: While the ?CHK? is displayed on the ...
...change it out with one of identical rating .I would probably also check the flyback circuit and flyback transformer although now you are getting into dangerous area,especially if you have no ...
88 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions