on then Sorry I can't help. 6. If it did come on then make sure the "tv" button near the top of the remote (assuming its the original remote) was pressed before pressing the power button on the remote
tv menu without the remote? hi..first check it out the brightness.It is available in the menu button,available on the top of the tv.If it still doesnt work Projection TVs have a high intensity lamp as
...remote then on the TV set. Press and hold Enter /Ok on the TV set then press and hold Mute button on the remote control. Hold the buttons until the Lamp Life Hours screen pops up. Release Mute button ...
...tv =ws65857 is not comeing on when i push the on butten I have had this same problem in the past. It turns out, over time the pushbuttons inside actually wear out until they don't work anymore. ...
...TV has a button on the front for focusing the lamps. Try finding this button or option in the menus with your remote. Projection TVs actually use three lamps, one red, one green and one blue. These ...
...TV to DVD/CD. I bought the remote on recommendations from Circuit City and twice had assistance in setting up although it seems more troublesome now than earlier after installation. Last installation ...
Philips Magnavox Projection T.V I have a Projection T.V I believe 60 inch. Im having a few problems with. Problem 1. My T.V wont turn on sometimes. The green power light will come on but the screen ...
remote either. The TV is about 5 years old. Anything can be done? Thanks you need to replace both convergence ICs number STK392-020 You can get replacements at the following link and they provide free
TV DVD control button faulty Usually when a button is faulty it is caused by wear and tear or dirt. Use compressed air to clean out the dirt. If that does not work, replace the remote.
318 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions