Samsung TXG2547 25" TV "turn down control old" Questions

...time. OR Channel up and channel down at the same time for 5 seconds. If you still have the same problem.Go into the menu and goto cc or close caption or text and turn it off. One of them should do

...model only 2 yrs old. any idea if there is a recall on this or if it could be a fire hazard? CHANGE ALL SWITHES ON CONTROL PANEL, POWER, BOTH VOLUME UP AND DOWN AND CHANNEL UP AND DOWN. THEY ARE ...

...down. Then turn up the sound level control on the converter box whether its a manual control or by remote. If you can get a combination that minimizes the hiss and gets higher sound level from the ...

...turn it back down. Turning it off and then back on makes no difference. Incidentally, we have not been able to control the volume for quite some time with a remote but have had to use the control on ...

...turn it off is to unplug it. The unit is about 4 years old and has never done this before. Checked the remote, removed the batteries, changed for fresh ones. Tried spraying bottled air into buttons ...

...down and the channels switch also. It's been doing this all night, i just unplugged it. It's not the remotes, i took the batteries out of them. The t.v. is less than 2 yrs old. check to see if the ...

...turn on later? I was watering my plants and some water ran down the front of my 4 year old, 32" RCA tv screen and it turned off. I am now not able to turn it back on using either method, tv buttons, ...

...down the display button this worked like a charm Yes it worked!!!!!! My two year old pressed the remote control and I did not know what happened. I pressed the display button and IT WORKED!!!! Thank ...

Turn on the TV. While holding down the RESET button on the remote control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the RESET button. Owner's manual

...turn on, I have to hold the power button down for a long time (several seconds) finally, the light indicator on the remote will light up beside "TV" and the set will turn on. I have replaced the ...