Sanyo PLC XF45 Multimedia Projector "polar factory reset" Questions

No yellow colors first reset all the settings to factory default, then try a different cable. if problem persists, one of the lcd panels, the polarizer lenses, or the main board is bad.

reset the settings to factory default. there may be a resolution issue. make sure it matches the source. if the line is straight and goes right along the pixel line, you may have an lcd issue. if it's

...reset the settings to factory default and change your cable. if that doesn't help, the polarizer filter on the blue lcd panel is fried due to excessive dust and heat. the optical engine will need to ...

...at the same time. swounds like a default setting has been changed .. Try finding in the manual how to do a master reset to factory defaults The blue polarizer "in" is burnt. You need to replace

...reset the settings to factory default and check the lamp for bulges, black spots, fogging or flaking, and replace as necessary. if not better, you may have a fried polarizer on one of the lcd panels ...

reset the settings to factory default. make sure that if you are using the computer that you are on vga, not composite. if it doesn't get any better, check the lamp for bulges, black spots, or fogging

...reset the settings to factory default. if that doesn't change anything, clean the dust out of the projector and check the second diffuser lens (fly-eye) next to the lens. also check the polarizers ...

...reset the settings to factory default. if that did nothing, you have an lcd problem. the ribbon cables may have come loose from the main board, or the polarizers are fried due to excessive dust and ...

colour out of nom swap the cables and reset the settings to factory default. if that doesn't help, you may need to replace the polarizers.

...factory reset. Cleaned lens. Replaced bulb back to original purchase Bulb now, to ensure bulb was in working order. Reset all colour setting and complete factory reset. sounds like polarizer