BenQ PB6100 Multimedia Projector "lamp flashing" Questions

lamp indicator flashes three times even with new lamp. projector powers, on when you try to start it up,lamp indicator flashes three times. Have replaced the lamp with new. Still flashes three times ...

PT-AE700U Lamp led flashes red On power up, power light flashes green for 10 seconds or so and then the LAMP led flashed red. Replaced lamp but still same problem. Reset the lamp hours. Here is the ...

lamp flashing, hd72 projector replaced lamp, still flashing, hd72 projector In most projector menus there will be an option to reset the lamp timer, it's usually under the "settings" area of the menu.

...lamp light flashing...please i need help, fan working perfect...i don't have a remote,is a problem, or not i just replace the lamp, and don't have any light coming from lens,starting green (after a ...

...lamp soon flashing during warm-up We had the projector flash the replace lamp warning, waited a bit to replace it, then did. Now the lamp is replaced and it still flashes the warning. How do I get it ...

lamp it self does not come on. if the lamp warning light is flashing, this indicates a defective ballast (lamp power module). if the lamp warning light is lit steadily, then the lamp would be at fault

...lamp and a flashing red status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status ...

lamp/cover light flashes Did you replaced lamp in projector? if yes, please make sure lamp cover is fixed properly on its position. There is safety switch under lamp cover that needs to be pressed to ...

...LAMP INDICATOR flashing red then. Problem: Lamp circuit failure Sulution: your two lamps are ok you need to repair the lamp drive circuit this is repairable and if you don't want to repair you buy a ...

...lamp led flashing when swithing on projector, lamp indicator starts flashing and message lamp appears on screen but with apparently working Press < and > and Power buttons at the same time on ...