Canon imageRUNNER 400S Copier "dc 1" Questions

...DC controller PCB is faulty. Making Corrections 1. Connectors Are the connectors J205 on the main power supply PCB and the connector J308B on the DC controller PCB securely connected? (zero-cross ...

...DC controller shield 1 Remove the following assemblies: ● Print cartridges and ETB.(ETB Is the black belt) ● Rear cover. ● Top cover. ● Rear top cover. ...

...1. Connector, DC controller PCB Is the connection between the connector J1015 on the main controller PCB and the conductor J316 on the DC controlled PCB normal? NO: Correct the connection. YES: ...

...1. Make sure that connector J1020 on the DC controller is seated correctly. 2. Replace the DC controller. Error related cyan cartridge: 1. Remove the cartridge, check physically toner is available or ...

...PCB ASSEMBLY 230V FM2-0858-000 1->0 N 930 NEW DC CONTROLLER PCB ASSEMBLY 230V FM2-0858-040 0->1 Y Affected machines: iR C6800 EUR 230V JKH00991 and later iR C6800N EUR 230V JKP02054 and ...

DC controller PCB is faulty. The door switch is faulty. E002 0000 The temperature of the fixing film is as follows: 1. has exceeded 100°C, but does not reach 115°C within 1 sec thereafter. 2

...1. Connector, DC controller PCB Is the connection between the connector J1015 on the main controller PCB and the conductor J316 on the DC controlled PCB normal? NO: Correct the connection. YES: ...

...1 (Red) +24 V dc +24 V dc +24 V dc 2 (Black) -SL2ON +24 V dc 0 V - +24 V dc Note: All voltages are approximate. If the voltage on Pin 1 is incorrect, check continuity of the CRF cable to the cam ...

DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>FCLEAR>ERR. 1. State Turn on the power switch, and clear E002/E003. Thereafter,

...1 (Red) +24 V dc +24 V dc +24 V dc 2 (Black) -SL2ON +24 V dc 0 V - +24 V dc Note: All voltages are approximate. If the voltage on Pin 1 is incorrect, check continuity of the CRF cable to the cam ...