Minolta magicolor 2350 Laser Printer "remove misfeed open top cover" Questions

...open the top cover. If there is paper in the output tray, remove it, and then fold up the output tray before opening the top cover. Do not touch the transfer belt. 2. Slowly pull out the drum ...

...remove what you can from the top. This may leave some of the paper tucked inside behind the back roller. Make sure your hands are clean. Keep the black flap open towards you, and lower the green ...

...misfeed problems with a dell 5100cn. I have cleaned all the rollers and changed the rollers in the tray . Still when the feed starts i have a growling , like the pressure is too tight. In their ...

...misfeed I would need more information for this fault. Your "question" is very criptic. Are you getting a paperjam error, or is the machine not picking up the recording paper or the document feed? Did ...

...misfeed or clearing a paper jam). The copier opens up.....now, located in the top unit, about center, is the drum / toner unit. It has a black plastic handle on it. Grasp this handle and pull towards ...

...remove it. Use the green gear (circled in yellow below) to turn the paper feed rollers and feed through jammed paper: Figure 11. The ADF pickup rollers. Paper dust or foreign material on the rollers ...

...top that you can see, behind the scanner lid. And the other you can see at the front when you open the whole lid, it sort of unclips once you unscrew it. I found paper in the side that it had been ...

...remove any paper. Open the back cover and check for and remove any paper. Open the automatic feed and check there as well as lifting the cover where the scanning surface is. Look in the rollers for ...

...remove the jammed paper continue to STEP 3. If you are able toremove the jammed paper continue to STEP 9. 3. Open the front cover. If you cannot open the front cover, do not useextra force. See below ...

...open the left cover. but there is no paper hanging or hooking anywhere inside the machine. I have some GENERIC suggestions, but as I work on competitor products, I am not familar with the specfics of ...