NEC HT1100 Multimedia Projector "status light blinks 6" Questions

status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

Status light is blinking red, power button orange nec vt700 HelloLook at the number of blinks of the status light.[1]  If it blinks at one cycle (0.5seconds On and 2.5seconds OFF) : Lamp cover ...

...green then it goes to a flashing orange light there should be a status for the lamp light; check to see if this one turns red. If it does count the consecutive blinks if it is 6 then replace the ...

...status light The status light is blinking red every .5 second at .5 second intervals for 6 cycles. The power light is solid orange. Per NEC manual, it says to wait a minute and restart. It just ...

...status light are green. Then to goes into stand by mode power goes to blinking orange, status goes blinking red ( fast blinking) & it shuts off. this is an NEC VT 660 about 3 yrs old. the lamp has ...

...status, then power light then goes constant orange and we here three beeps, will you please help me with the problem. Hi there I'm shocked that NEC can't answer this guys. The NEC's & Acer's make use ...

...status light blinks green about 12 times, several rotations. Then the fan comes on, the power light and status light switch to red, and they both blink twice, several times. The the power light stays ...

...status light just continue to blink with no illumination I had the same issue, what I figured out was that I never removed the lamp door correctly, causing a small plastic piece to break off. To see ...

...technical support, if the status light flashes red six times, this could indicate a defective lamp. If a new lamp is installed and the project still won't turn on, the projector will need

...status light starts blinking green, for about 10 seconds then goes out for 5 seconds and comes back on a second time then fan kicks in high, the status light turns red and power light is now blinking ...