Mitsubishi WT-42311 42" Rear Projection Television "tell tv 3 digit code" Questions

...tell you how to do it. http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotes/troubleshooting/TechRemo1.5Trou.shtml#PS the code for the direct tv remote for a coby tftv-4025 ...

...TV from it's power source for various times, ranging between 5 minutes and 24 hours. If it still shuts down, press the DEVICE and MENU buttons on the front panel simultaneously and hold it for 5 ...

tv comes on for about 3 seconds and goes off when it goes off do the self check--on front of set press and hold both the Menu and input (device) buttons for at least 5 seconds and release both buttons

...tv shuts off 30-60 seconds after it is turned on, it powers self off After set shuts off, wait till the fans stop. Then press menu and input at the same time. The set will flash a 2 digit code. count ...

...tell you what it means. I hope you get 2,2 as it is the most easy to resolve. If this told you something you did not know rate this solution as very helpful as I do this here for free. REGARDS, SD ...

tv when plugged in power led blinks 3 times then when i switch it on remains powered for about 2 seconds before switching back off again... DO THE SELF CHECK THIS SET HAS: WHEN POWER LIGHT GOES OUT---

...tell us how it worked! you don't need the remote that came with Tv if workable code is mentioned in manual then you will have to program it http://www.hifi-remote.com/ofa/codes-tv.shtml#tv If none of ...

...Tv will not turn on???? WS-B55 If you check your owner's guide, it'll tell you that if the green LED is flashing, wait a minute forit to turn off before retrying power button. I know this won't be a ...

code that will tell you what is wrong with the tv. The digits are seperated by pauses. 2 and 2 is common and points to a convergence failure. That's the simplest repair you can expect. Goodluck to you

...TV becomes unresponsive with all 3 lights blinking on the front. When I replug the TV, the TV does some clicking and eventually cycles a few times with the lamp light blinking. Then finally it stops ...