...Wt-46807 Power shuts down after turning on. Tried the solution of pressing the menu & input buttons at same time for at least 5 seconds. Power light error code was 2 blinks/pause 2 blinks/ pause ...
when i turn it on it shuts right back off Please do the self check this set has: When the power light comes on and goes out press and hold both the MENU and Input (also called Device) buttons at the ...
two pulses, a pause and two pulses two, then two blinks is error code for short protection. Do you know what it means? It means most likely (98%) one of the two fuses that protect the convergence ...
...WT-46807 46 in. Rear Projection Television tv. It is approximately 7 years old. We used it for 4 years then moved to a new house and stored it in the basement (covered and unused). We just started ...
...WT-46807 Dead Nothing at all. The power cord works. The little fuse next to the power cord attachment is good also. Any ideas. We had lightning the day it died. Does the led light up when power is ...
screen shuts off shortly after turning on Do the self check this model has, when green power light comes on and then goes out on the front of the set press and hold both the Menu and Input (device) ...
...WT 46807 will not power up. The green light on the front stays on for approximately 2 seconds and then goes out with no audio or visual. I tried unplugging the set for about 15 minutes but this did ...
When I turn on the TV power button it stays on for two seconds and then goes off. The TV never comes on. When you try to turn it on and the green light goes off: On the front of the set press and hold
...WT-46807 instantly lost its convergence on both edges (more on the right than left) with slight loss on the left. I am not able to reset the convergence with factory reset or manually, even in the ...
531 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
301 Questions