Mitsubishi WD-52327 52" Rear Projection HDTV-Ready Television "removing ballast" Questions

i need simple instructions on how to replace the ballaster for a mitsubishi wd-62525 Minor point, the correct term is 'ballast' like on a fluorescent lamp. Unplug the unit from the wall. Remove the ...

...removing the ballast the TV cannot talk to it and run itself properly. Also using a xenon lamp will give terrible color reproduction as its not putting out nearly enough lumens in the right spectrum. ...

Where is the ballast board on a Mits. WD-52627 In order to reach ballast you have to remove optical block. Ballast is usually covered with metal shield. It's located on the right hand side of optical ...

ballast to lamp connection cable melted on one side The TV was playing just fine until we started smelling burning plastic, so we turned it off and waited for it to cool down. I opened the lamp cover ...

New lamp installed per mfg. instructions. status indicator flashes red and lamp failes to strike. Is there a security interface circuit that will disable the unit if the rear access panel is removed ...

...removing the chassis, but have a problem.. the power cord that goes from the chassis to the set , i don't know how to remove it. also, the cd gives instruction of disconnecting two connectors located ...

3rd lamp purchased within 2 yrs Recently purchased a lamp 2 months ago. This is the 3rd lamp within 2 yrs. The service light came on indicating to replace lamp. Tv was still playing at that time. I ...

Did you fix the lamb issue? I am having the exact same problem. I have changed the lamp and still no tv. The lamp indicator light is solid red and I have a 34 code. How do i know if I pushed the ...

WHERE CAN I FIND THE BALLAST IN THE MITUSUBISHI WD 52532 MODEL REPLACING THE BALLAST ON A DLP TV....MITSUBISHI MODEL WD 52532...WHERE IS IT EXACTLY LOCATED. I HAVE REMOVED THE BACK ACCESS PANEL hint: ...

I have replaced the bulb in 73" DLP tv, plays for about a week, then turn it back on, got sound for a few, checked the bulb, pulled it out to ensure had not already blown again. Reinstered and played ...