Mitsubishi WD-62525 62" Rear Projection HDTV "tv input" Questions

...tv on which the remote clearly says input numbers. if you look on the back , the inputs are labled, then go into the tv menue and go under device lable and match the input it is plugged into, to the ...

...tv input to the HDMI input and it should work. If your tv does not have HDMI input then it should have component input indentified as red blue green connectors on the back of tv. This is for video ...

...to the back of your tv set, dvd player, vcr, cable box etc; you have to tell the tv which device you want to use by selecting the right one on your tv remove input selection. Hope this was any

mitsubishi tv- sony 1030 avr hdmi connection no picture have to change inputs to make connection. After making connection, turning off then back on inputs will not respond. Change inputs again to get ...

TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1). Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the

...TV input for dvds or video game consoles. Look for a Source or TV Video button on your TV remote, not the cable remote. Before doing this, please make sure all connections are secure. I hope this ...

No video in any of the TV inputs I have a Mitsubishi WD-62525 DLP TV. Today when I turned it on, there was no image only a green screen that looks like a scrambled signal. The sound is good. It ...

...original remote. there is 3 up/down buttons, one is volume, one is channel, the other is input. The input up/down will scroll through all the inputs. Some of these TV's don't have it on the front ...

...tv's Input 1 or 2 on the back input panel of the tv set.  If you don't have RCA's you may use a RGA- jumper wire (cable wire made into a 4 ft segment by the tech or buy a short cable ...

...input on the TV to pick up the signal of the unit, on the remote or TV itself, there with be a(n) "input", "source", "tv/video", or "video source" button that you can choose the same input you chose ...