...line only appears on the autofeed, then the feeder optics have a dirt or some other contaminate on the optical sensor/lens area. A good cleaning inside the autofeed where the optics scan should ...
Question about Panasonic Office Equipment & Supplies
i have lines on paper after i changed out the drum and blade the lines may be generated by the laser unit. do a test printout in f9 to check if the lines are generated by engine or captured by optics.
Question about Ricoh Office Equipment & Supplies
... glass right? This can be done by removing the platen glass. Black lines can be caused by: a) Dirty optical of the scanner. b) Cleaning blade damaged, (in this case the cylinder also will be damaged) ...
optical path and the laser cover glass? Remove the glass and clean all the mirrors with a soft lint free cloth. Do not use and sprays or cleaners, just a dry cloth. Clean the scanner bed and the glass
...line will not go away. Is there something else I should try. Thanks! From experience with similar machines, it sound very much like either contaminents in the optical path or a scored drum. what's an ...
...line when you print something. Printing part is fine. How do you correct the problem? I would appreciate your help. I assumed you are using a digital copier/printer, in digital machine there were 2 ...
Question about Ricoh Office Equipment & Supplies
when printing on my aficio1232c it put a line through the image area. what causes that there may b ur optics dirty or the cleaning blade faulty to clarify the problem just take out a print of counter ...
.... Do the lines appear when you are scanning. If so I would think that the problem could be in the optical unit. check that the unit is plugged in correctly. make sure that any covers above the
Question about Rimage Office Equipment & Supplies
Receiver end of faxes shows vertical black line. I changed drum and toner also cleaned glass scanner. I do not have a glass flatbed scanner only an automatic feeder. The cause of this problem is ...
...every time. Does it happen when placed on the glass and also through the document feeder? (for optical check) Inspect the heat rollers to see if they are cut? Inspect the drum or
13 questions posted
Usually answered in minutes!
40 Questions
32 Questions
8 Questions
7 Questions
3 Questions
