Question about Swintec Office Equipment & Supplies
...type the letter A, I get the Letter V and non of the letters or numbers are correct.Letter P is a #2. You might have a "proportional space" printwheel but the pitch selector is on 10, 12, or 15 ...
Gapping/overlapping of letters We have the IBM correcting Selectric II and for some reason when the lock key is on there will be a large space between some of the letters, causing an overlap onto the ...
...correct letters I have a ML100. I have been using it for about 6 weeks. Shortly after changing the ribbon I began having correction problems. It would correct the error but the wheel did change any ...
Question about Brother Office Equipment & Supplies
...correct position. 1. Turn the machine offf for 15 seconds and turn ON, or Depress MODE RESET(the Q key). This will rehome the Daisywheel.I If it prints correctly for awhile then looses its' position, ...
Question about IBM Office Equipment & Supplies
...After typing a few letters, take the ribbon out and look at the letters on the ribbon.Are they in the middle of the ribbon or are they at the top or bottom of the ribbon? middle of ribbon is
...prints "w" Is there some way to fix that? Check the pitch selector switch if it is in PS this will cause this problem. DickyO You Want to make sure that the ribbon or correction tape are not ...
Question about IBM Office Equipment & Supplies
...cause this trouble. Fine adjustments may also be needed. When you hit the correction key and it backs up, does it stay in the same spot but not correct or does it space when you type the character ...
Swintech brand electric typewriter. When typing the ribbon wheel is slow to advance and causes right of letter to be cut off. What is wrong? Check for bent or broken spokes on the PW. Be sure the ...
CORRECT THE LETTER TYPED, IS THE LETTER WHEEL REPLACABLE? To answer your question yes the print wheel can be changed, BUT that is not your problem. The machine needs to be reset or the reset tab needs
Question about IBM Office Equipment & Supplies
...type impression is messy and sometimes missing part of the letters. I have check for proper ribbon placement and cleaned the ball element, but the impressions are still dirty looking. How can I fix ...
273 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions