20 Most Recent Brother ML-100 Typewriter Questions & Answers


Look for key or slide switch that says KBii press the code and that key or move the switck.

DickyO

Brother ML-100... | Answered on Jun 13, 2019


Hi Ken, have a read of this and see if you can find what you are looking for. http://www.amazon.com/Brother-ML-100-Daisy-Electronic-Typewriter/dp/B00004WFZP Cheers Greg.

Brother ML-100... | Answered on Mar 04, 2015


By going through this manual it does not appear to have a compression setting that you can adjust.

https://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_ML_100_EN_216.PDF

Brother ML-100... | Answered on Feb 23, 2015


when the print head reaches the left side it touches a switch to cause it to inter the setup for the print wheel and ribbon mechanism

Brother ML-100... | Answered on Feb 21, 2015


If you aren't in a language mode or KBII the printwheel homing pawl is probably broken. You need a tech.

DickyO

Brother ML-100... | Answered on Feb 19, 2015


Check to be sure the ribbon or L/O tape aren't tangeled in the P/W, check the P/W for bent spokes.

DickyO

Brother ML-100... | Answered on Feb 19, 2015


ML 100 takes a ribbon that should snap iin place.. front toward you first then back drops down....

Brother ML-100... | Answered on Dec 11, 2014


I found a small piece of plastic caught under neath the carriage
of my Brother GX-6750 Electronic Typewriter. The piece looks as if it slipped onto some type of small end cylindrical peg one sixteenth long and one thirty-seconds in diameter. The piece has a lip where it latches on to something and the other end is flat with a tiny edged lip. The middle piece is where some peg goes into it and the piece is one piece. The carriage works improperly and fails to type. The hammer mechanism won't move forward on it's pivot to punch the daisy wheel. When the keys get punched, nothing happens. I just bought the GX-6750
through ebay and it arrived that way today. I'm looking for suggestions to get it fully operable.

Brother ML-100... | Answered on Dec 09, 2014


It is not uncommon for one of the wires to break in the set that comes from the keyboard to the printer

Brother ML-100... | Answered on Dec 06, 2014


It is a slow machine---get what you pay for

Brother ML-100... | Answered on Sep 27, 2014

Not finding what you are looking for?
Brother ML-100 Typewriter Logo

271 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Brother Office Equipment & Supplies

  • Brother Office Equipment & Supplies

Most Popular Question

want use portable power outlet our

  • Office Equipment & Supplies
Loading...