Question about Brother Office Equipment & Supplies
...down the Stop button, power the fax machine back on. Keep the stop button held down for a few seconds. That should clear the jobs resident in memory. Usually the memory of Brother Fax machines can be ...
Question about Brother Office Equipment & Supplies
...power, then hold down the Clear/Stop button and continue holding down for a few seconds after turning the power back on. This is the procedure for clearing anything that is stuck in memory and will ...
Question about Brother Office Equipment & Supplies
...down is there anyway to restart ( no lights no power no dail tone) Check to make sure the power supply cord is good and snug, if that does not change anything you have a power supply problem in the ...
Question about Brother Office Equipment & Supplies
...down & re-start. a) Is this due to a power surge when the Brother 4100e emerges from the sleep mode? b)Fax machine is plugged into a Curtiss Surge Protector; is there some other solution to avoid ...
Question about Brother Office Equipment & Supplies
...Power down - no change. Unplug everything - no change. It receives incoming faxes just fine. Maybe one bottom is stock down... puede ser que algun bottom este aplastado u oprimido. verify all bottom ...
long as you're at it, get one with surge protection for both the power and phone lines, and your fax might be saved from sudden death in the event of some guy driving into a power pole down the street
Question about Brother Office Equipment & Supplies
...power, holding down the clear/stop button and keep holding it down while you turn the power back on. Keep holding it for a few seconds then release. This will clear what ever is in the memory that is ...
...power on a brother fax-575 No, sorry. In my case, it was enough to disconnect the machine from the 110V line for about 10 min. When I plugged it back in, it rebooted in a couple of minutes, worked ...
Question about Brother Office Equipment & Supplies
...down menu plug power back in while holding down menu when screen says maintenance press 0, 1 it will reset. to get out of maintenance press 9, 9 * important follow these instructions fully or you may ...
... The machine was in the midst of printing an incoming fax of about 15 pages when this occurred. unplug machine hold down the stop/exit button plugin macine while holding button down for about 5 ...
168 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions