bobbin case, a bobbin that is would properly, or when you're getting to the end of the bobbin's thread and the thread is loosely would on the bobbin at that point. You're best bet is probably to buy a
Question about Sewing Machines
...bobbin in the case and pulling the thread the bobbin should turn clockwise. Good luck. I have a Brother VX-1120. I'm not sure if I'm putting the bobbin back in the case correctly because the bottom ...
bobbin case door when you open it there is the bobbin case & also should be the feed dogs always keep the bobbin area clean of lint or loose threads take note of how the bobbin case is inserted in
...bobbin case. The bobbin case fits into the bobbin shuttle. Once you get the jam cleaned away, raise the needle to it's highest position and remove the bobbin case and/or replace the bobbin case. ...
...bobbin case and re-install it. Check that the bobbin is turning the correct direction in the bobbin case and the thread is threaded through the bobbin case tension. Set the top tension to the midway ...
Question about Singer Sewing Machines
...bobbin case fits in the machine? particulary the lower right clip arm and the upper left metal foot looking part? The bobbin case is not secure so when i start to sew t is there a picture of how the ...
...bobbin within its case. Try tipping your machine back and forth to listen for a loose bobbin or loose object. If, you google your make and model you should be able to find a manual for your machine. ...
Question about Sewing Machines
bobbin case;re threaded bobbin; new needle; frustrated;any ideas??? Have you tried the tension tips in the owner's manual? Be sure to ALWAYS RAISE the presser foot when threading the machine. There is
Question about Singer Sewing Machines
...bobbin case the needle initially wouldn't pick up bobbin thread. Now that it does pick it up the thread bunches under the model 28/08 built in 1982 Top tension too loose causes looping under, unless ...
Question about Sewing Machines
...to be making any progress, then service may be your option. Or perhaps picking up a new bobbin case for your machine will be a less expensive fix (BTW, having an extra bobbin case is a good idea).
119 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions