GE Hotpoint Top-Freezer Refrigerator "something stop sliding" Questions

...company for repairs. When plastic warps inside the refrigerator it perhaps has been caused by something overheating,

...both the freezer and refrigerator sides. Tried resetting power, but no good. Could the problem be something else? Thanks for any ideas. Slide unit out from wall and lower temp setting and feel if ...

...it's not measuring correctly. If not, check that the door is actually closing completely and something isn't interfering with the seal around the door. Next, is the seal intact? Is it cracked, ...

...it. I have tried to bang on it lightly but it doesn't work at all. probably the blades are hitting something , slide the fridge out and inspect, as far as it running all the time, many fridges run a ...

...something but if it does not work please let me slide on the low rates. I have seen this happen a lot when the defrost timer goes into defrost the switch is in a place on timer that causes a weak ...

...pull out from under the gasket with ease, if it does than its been damaged or the door got tweaked. If the switch is the problem you could seal it with silicone or something to stop the air ...

.../ sealing. While working on it, it stopped closing altogether, seemed to have dropped 1/4 inch or something. Is it a cam? Is it a hinge? Is it the gasket? Is it the whole door? And there's only a ...

...ice maker was still working until it just stopped today. Now can not even slide drawer out. Like something is holding it in. Have taken out 100 times previously, so that's not the problem. How to ...

...stopped working. My wife and I were gone for two weeks and had the heart turned down so I assumed something was frozen. I checked the tubing in the freezer door going to the dispenser but it was

if pan is made of plastic, it could be cracked. it is located at the bottom of fridge where you see something loos like a grilled vent. remove that bottom piece to get to the drain pan.(it just slides