...fix this? You probably just have an air lock at the pump. This will keep it from pumping water. You just need to open the drain valve for a few seconds to relieve the air. when it runs water you ...
...fix as disconnecting the pressure switch and reattaching? Thanks, Richard You probably need to run water into the skimmer to force air out of the suction line. sounds like one of the pumps is not ...
...air lock, if you open the drain valve till you get water out that should fix that. Also check to be sure the isolation valves are open under the spa. I hope this helps. I just recently had this ...
fix. Any suggestions? The dr error code is for "dry". Meaning that the control system is not sensing that water is flowing through the heating element. With a new spa, and you just having drained it ,
fix that issue, as long as you feel comfortable there is no air trapped, then other common problem that fails is the diaphragm is stuck or warn out, that is the part that allows water to pump through,
...air lock and can fix this by taking the hose off till it's under water or hold it upside down in water till it starts. If you hold the cord while it's in the water an just make sure it's taught you ...
...created an air lock. You can fix this simpley by opening your drain valve untill you get a steady flow of water out of it. Also check to be shure your shut off valves are fully open before you
...force water down the skimmer pipe or find your drain valve and open it for a minute or two till it runs just water and no air. This will get water to the pump and the heater. This should fix you
...fix it? It has been running off of an extension cord since we got the new pump (2 years ago) and we have never had a problem. If I get a 14 or 12 gauge cord, will it solve the problem and start ...
106 questions posted
Usually answered in minutes!
55 Questions
47 Questions
21 Questions
