...51 code come up on my washer...called the Kenmore guy..he came out and you'll never guess what the problem was. Not the Motherboard..nope..not anything that was major..are your ready for this? It was ...
...washer to start after unplugging it for a while and then plugging back in. Not sure how long I will be able to do that before it goes completely out. If anyone else has had any better luck on getting ...
Question about Kenmore Washing Machines
...Washer is a little more than a year old - Kenmore Elite Oasis - top loader. While washing load - after 5 -1 0 minutes it begins beeping and flashes the F followed by 51. What does that mean? Help! On ...
...washer started just fine and then it was going to start the rinse cycle and starting beeping and flashing LD. It wont let me do anything it wouldnt even turn off. The lid unlocked but it would not ...
...washer was in the middle of a load when it stopped and started beeping and flashing "F51". I stopped it and tried to start it back up. Now it is just frozen and won't do anything! PLEASE, if you have ...
machine flashes f-50, shuts off. Mine is not the stainless, but it is the Oasis HE, and I assume the errors are the same. Just curious if anyone has seen this error. The machine is about a month old, ...
...51 what is this Keypad/User Interface Failure F then 2 flashes when in: Diagnostics Test mode if a stuck key is detected. Standby mode if there is a user interface mismatch. DISPLAY (Saved Code) ...
...beeping and flashing F51 Hi Thanks for using FixYa and I am sorry to hear whatever happened. Error F 51 flashes when there is a motor rotor position sensor (RPS) failure. Please follow the step by ...
...Washer stopped with 17 minutes left during rinse and drain cycle. Blinking f51 code, but I think the machine may have been loaded with an unbalanced portion of wet towels. I balanced the clothes, ...
...flashing this code. Remove the bottom panel. The tech sheet is located beside the white box to the left. It gives diagnostic directions and failure codes. Suggest you clean the dispenser area up and ...
1,394 questions posted
Usually answered in minutes!
3,839 Questions
0 Questions
69 Questions
45 Questions
20 Questions