Kenmore 73502 / 73504 / 73509 Bottom Freezer Refrigerator "evaporator fan motor high" Questions

...EVAPORATOR FAN MOTOR TOO LOUD Repair technician told me there were problems with the original evaporator motor and replaced it with a new high speed one. Now the fridge is too loud. Before it was ...

...evaporator fan. Both are inexpensive and easy to check and replace. Here are a couple links that should help Condenser fan replacement Evaporator fan replacement sounds like Evaporator fan motor is ...

...evaporator fan motor draws air over the evaporator (cooling) coils and circulates it throughout the refrigerator and freezer compartments. Some refrigerators have more than one evaporator fan motor. ...

Evaporator Fan Motor noise is excessive for this refrigerator. GE Profile CustomStyle Model PTI22SFMARBS Serial# SF900146V Despite my urge to vent about GE refrigerators, I'll keep this short. If you ...

...evaporator fan not running Hello, I have a Frigidaire Gallery refrigerator model PLHS267ZA. The evaporator fan has stopped running, it shows no resistance so I assume the fan motor is bad. I have ...

evaporator fan does not come on replaced evaporator motor because it was burnt out.New one does not come on.Im getting 110v across terminals that plug into fan. Connected fan directly to 110v and it ...

CHECK FOR 12 V @ EVAPORATOR MOTOR use a volt meter that reads dc voltage Nothing to my knowledge in a side by side refrigerator freezer works on 12 Volts. Evaporator fan motors are generally 115 Volts

...evaporator fan stopped working. Now I got the replacement for the motor of the evaporator fan and for the heater. My QUESTION is: Is there any risk that a faulty motherboard could burn the newly ...

...evaporator fan motor. OR often if there is moisture in the gas line, there is a whistling or ghosting noise. If all is running well then you could just leave it until a problem arises it until ...

...evaporator fan. The ice is probably inpinging on the evaporator fan blades. If not corrected, the fan motor will burn out and will need to be replaced. Take you model number to searspartsdirect.com ...