Saeco Gran Crema Espresso Machine "fix little steamer" Questions

...little water out of the steamer by turning the nob without the steamer button being pressed, though this again only let a little water out and then the red light came on. In addition to trying to ...

steamer wand but still a little water was spurting out. It finally quit emitting water and the 5 lights blinked and the infinite descale cycle completed. This model espresso maker was a lemon and been

...little pressure. The pressure seems to lessen more when the temperature light is off, and increase when the light comes on, but even so, it is hardly enough to steam milk, and today it almost stopped ...

little bolt next to the steamer although there did not appear to be any obstruction there. Does this mean I need a new pump? Is this something I can do myself? I have a limited budget for this project

...little too. It just bubbles the milk. They want us to mail it back, but don't pay for shipping to repair! Is this something a) i can fix myself or b) i can hire a tech for? Help! Mary Kay ...

fix. Turn the machine off. Open the front panel. Remove the dump box on the side. Pull the grinder unit out. Look at the thing you just pulled out. You'll see a little ramp going from where everything

...little plastic covers. once they are removed, shine a light up them, one side will have 2 tan reset switches, the reset button stick out between two wires. i had to use a butter knife to get to them. ...

...little more ( we are trying to find the old threads) and tighten. Install screen, and tighten with your fingers. The screen just needs to be flush with the bottom of the brew head. That should do it. ...

...little metal filter attached by a screw and clean it off well and put a new gasket in it should solve your problem. The machine has been left unused and uncleaned for too long. The **** has basically ...

...little tab would prevent further tightening. So rather than having water through the filter, it would escape first as steam in the wand. The Fix: There were a couple of screws (I think just two) to ...