KitchenAid Superba Architect KSCS25INSS Side by Side Refrigerator "whirlpool ice maker falling down" Questions

...ice maker of a french four door refrigerator water line hooked up,open door to ice maker check to see ice maker metal arm where cubes fall down from is in the down position,,when its in the up ...

ice maker not shutting off When we get ice out of the door the ice maker keeps shooting ice outand doesn't shut off. Sometimes it doesn;t come down the shoot but when you open the door it all falls on

Whirlpool refrigerator Model # ETIRHMXKT 4163522 Water is leaking from back of freezer compartment and then freezing on floor of freezer compartment. Ice maker is only making partial ice cubes (not ...

...Ice plus on. 1 top left, and 1 on the right side. Slightly pull up on the front of each clip and remove the controller. most likely behind this you will find a gear that is broken and may fall out of ...

...whirlpool they have a bar as well. you can turn off ice maker by pushing it up and it locks in place to stop ice production. if u want it to make ice u push it up slightly and it should move down. ...

ice maker in whirlpool gz25fsrxyy2 Should be a wire feeler arm that runs front to back on that icemaker. If it is stuck in the up position---the icemaker is OFF. It should be hanging downward to be in

...ice. How do I get the arm to drop automatically? Is it sticking all the way up in off position?If so there is a redesigned arm to stop this problem. Instead of just a wire arm, it has a plastic flap ...

ice maker problems I have taken out the water feed line that goes to the i/m and is not frozen also i took a straw from the inside where the water would fill the ice cube tray and put it threw the ...

ice maker ther are two screws on the top where the ice fills at and one at the bottom. Also disconnect the quick connect for the ice maker. Remove back panel. You will see one of two things either all

ice maker GI1500XHW The ice mager stop making ice, but I saw the froster on the pipe inside of the bin. I noticed that the exhaust fan for the compressor is not spinning, not sure if it is the issue. ...