Need Drivers I purchased an InFocus LitePro 570 LS Projector 2nd hand. I have the VGA plugged into my laptop, but still don't get an image - just the light projected. Do I need drivers for my PC to get this older model to work? Thanks, Jess

Specifications Display Type Active Matrix LCD Brightness Lumens 300 Contrast Ratio 100:1 Native Resolution Compatible Resolutions VGA (640 x 480), SVGA (800 x 600), Computer Inputs 26pin (Y cable for HD15), HD15, 2 x RCA (L,R stereo audio), RS-232, Video Inputs 2 x Composite video (RCA), 2 x S-Video (4-pin mini din), 2 x Video Audio RCA (L,R stereo), Other Inputs Microphone XLR-type Outputs Stereo audio (RCA L,R), Video Compatibility NTSC, PAL, SECAM, HDTV Support none Audio 2 x 5-watt stereo Lamp Type 400W Halogen Part Number SP-LAMP-LP Life 40 hours
Make sure that your PC/Laptop source resolution is set to VGA (640x480) or SVGA (800x600)

Hi Jess

Is your PC's image splitt ?

Right click on your desktop and go to properties - then click on settings and then advanced settings.

You'll see a block with two screens on it. If only one is activated - activate the secondary screen as well.

If you are using a Notebook also try holding in the Fn ( Function ) button - just left of your spacebar and in your F-row buttons at the top there should be one with two screens on it - Differs from brand to brand of PC's.

Hope this helps you !