My gilera vx 125 was stolen and recovered but the assembly lock was wrenched: lock body, lock housing and barrels, so i bought all of these but the new key which came with the barrels cannot be recognized by the cdi so the immobilizer isn't disabling. The old key can though, how can i program the new key with my cdi?
Do u meen the code key you can swap chips over just put a needle through the tiny hole in the swing out chip holder u will no wot i meen my frend gd luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if its a vx gilera u will need ur brown master key to start the bike up again,,if its a sp there should be a green and red circular part with a plug on it u need to connect this to the wiring loom also check that the petrol cable has not been cut where the carb is,this is common pratice for police when they find stolen bikes,to stop it being stolen again,if they dont recover it str8 away,
You definitely need to change all with a kit of : ECU, engine main switch, seat lock and you will get in the kit 3 new keys, 2 black and 1 red.The black ones need to be programmed from the red one at a dealer's workshop.Then store the red some place safe.
×