2004 Honda XR 125 L Logo

Related Topics:

A
Anonymous Posted on Aug 04, 2014

2004 Honda XR 125 L how to disassemble the front forks

5 Related Answers

Anonymous

  • 2336 Answers
  • Posted on Nov 10, 2008

SOURCE: level of oil in front forks

not sure about newer models but the old models take 280 ml in each fork

Ad

Anonymous

  • 1512 Answers
  • Posted on Dec 08, 2008

SOURCE: Front fork oil capacity

Hi Lukepentcof.

its 350cc or 11.8 ounces in the Clyma book, but that's for a 1986 onwards model. you can vary the amount you use to suit your style of riding anyways. I doubt it would be that far from the mark.

regards
robotek

Anonymous

  • 440 Answers
  • Posted on Aug 19, 2009

SOURCE: my honda xr 125 hesitates sometimes when in rev

The 1st thing to try is change the spark plug
Also drain the carb by way of the drain screw at the bottom of the carb bowl

Ride Safe
Bike-Doc

Please mark as helpful(if it has been!!)

Anonymous

  • 10 Answers
  • Posted on Sep 10, 2009

SOURCE: Need to disassemble a Honda NXR Bros 125 clutch

you need to use a large air impact wrench

tombones

  • 3567 Answers
  • Posted on Oct 18, 2009

SOURCE: Need to know the mixture settings on the carb, 04

From a LIGHTLY seated position, turn both adjusting screws outward one and one half turns. This is the stock setting.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How can I harden up the front forks on my Honda 125 Varadero please

Measure the diameter of the springs top,cut pipe(Usually stainless steel)and remove the tops of the forks,install the spacers in each fork tube and enjoy-Experiement with the lengths,typically start with 1 1/2~3 inches.....You can also change the thickness of the fork oil...The tubed method does not require higher air pressure to work....
0helpful
1answer

How to strip the fork

drain the oil, taking care to hold the spring, remove the upper cap, drain the oil. remove the allen bolt from in the lower end of the fork, pull out on the inner leg forcefully. Do not attempt to dismantle the valving
0helpful
1answer

2005 Honda XR 125 L fork oil capacity

Front Fork Oil cc (right leg):170
Front Fork Oil cc (left leg):170
Fork oil grade:10w
Valve Clearance Cold - Inlet:0.08
Valve Clearance Cold - Exhaust:0.08
Engine Oil Grade SAE:10w/30
Engine Oil Classification API:sg
Engine Oil quantity with filter (litres):0.9
Idle Speed (rpm):1400 - 1500
Spark Plugs Gap (mm):0.8 - 0.9
2 Stroke Tank - Litres:No
Float Height:14 mm
0helpful
1answer

Where is the battery on honda xr 125?

it should be located under the seat towards the front!

good luck!
0helpful
1answer

Need to disassemble a Honda NXR Bros 125 clutch

you need to use a large air impact wrench
0helpful
1answer

Steering dodgy on my honda xr 125

two reasons are that you have either slightly bent your front wheel /or front forks or both even the slightest damage to either of these can throw the handling and steering the best thing to do is visit your local bike dealer and have the aliignment checked /before you do that though raise the front wheel off the ground and check for play in wheel bearings hold the suspension with one hand so the steering doesnt turn then with other hand pull and push wheel from side to side if it rocks it will be the bearings
Not finding what you are looking for?

262 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...