2000 Yamaha YZF-R6 Logo
A
Anonymous Posted on Sep 21, 2013
Be the first to answer

2000 r6 wont start was cruisin at 80mph smelt electrical burning guage filled with smoke ign fuse fried replaced cluster and fuse and battery then ecu fried got a new ecu now will only crank over

Answer This Question

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on May 08, 2010

SOURCE: 2005 yamaha r6 want start. New plugs,replaced all

my yamaha r6 will not start all im getting is clicking

Ad

Anonymous

  • 921 Answers
  • Posted on May 16, 2010

SOURCE: i have a 2005 r6...just put in a new battery..bike wont start

maybe, now this is just a guess! but your starter shaft is just spinning and not engaging properly..check starter or solenoid to starter wire connections are that they are on solid, and no corrosion, measure bat volt!!!... should read 12.4v "minimum"! if not battery is either going bad or might need a charge...correct voltage reading should be 12.7v to 13volt.

rigger094

  • 188 Answers
  • Posted on Oct 20, 2010

SOURCE: i have an 01 r6. new gas new plugs new oil new

YOU MIGHT BE FLOODING ENGINE

sisadsl

gavin jones

  • 1508 Answers
  • Posted on Feb 25, 2011

SOURCE: my 2000 plate r6 starts

recheck all the battery and wire connections, take the volt meter with you next ride, to check the bat voltage if it stops again.
The stator can develop a layer short, which can be intermittant due to heat and vibration.

Anonymous

  • 139 Answers
  • Posted on Sep 05, 2011

SOURCE: my yzf r6 wont start

suspect main fuse by the battery.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I replaced fuse for interior lamps 10amps with a 25...i smelt the burn after drving home bout 7 miles .tried to restart my caddy now it wont start
hopefully you didn't fry all your ignition wires
Read full answer
Jan 06, 2014 • 1999 Cadillac DeVille
0helpful
1answer

Bought a 2010 r6. Less than 3K miles on it.. I had charged the battery and put it back in... I reversed the leads and got a 60 error code.. Replaced a fuse and cleared that code only to get a 11/12 and...
You might have fried your computer. Hooking things up backwards have that effect on electrical components.
Read full answer
May 29, 2012 • 2008 Yamaha YZF-R6
0helpful
2answers

1998 ford escort wagon with electrical shorts and failures... door locks and horn fuses blow with KEY OFF... guage cluster,turn sigs,front wipers,blower motor DEAD battery dies over night (new) ALT...
I'd start by checking for power off at the IGN switch with key out.
Read full answer
Jul 08, 2017 • Ford Escort Cars & Trucks
2helpful
2answers

I have a 99 r6 that keeps burning up the wiring what can I do to stop this from continuing to happen
There is a dead short in the wiring or a switch is shorting out. If the wires have smoked you will need to find the original short, fix it, then strip the wiring harness in the burned areas and replace any burned wires. You may need to replace a section of the wiring harness or possibly the entire wiring harness. Below is a website where you can see the harness > please rate my answer www.babbittsonline.com/pages/parts/viewbybrand/default.aspx
Read full answer
Sep 02, 2010 • 1999 Yamaha YZF-R6
0helpful
1answer

Hi I wired up my motorcycle batter the wrong way
You probably just blew a fuse, its probably behind the L/H side cover.
If you fried your wireing you would have smelt fumes/seen smoke so don't get too worried. Find the fuse box & check the main fuse

regards Andrew
Read full answer
Jul 17, 2010 • kawasaki Z 750 Motorcycles
0helpful
1answer

I recently put an amp stereo and speakers in my car last night on the way home I smelt burning wires. I was 30 seconds from being home so I pulled in and began taking everthing out and rewired everything....
The battery itself is toasted.
Replace it.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Read full answer
Jun 24, 2010 • Car Audio & Video
1helpful
1answer

I have a motormaster 1750 inverter hard wired in my semi truck, I had the inverter turned off, I replaced all 4 batteries started the truck smelt something burning and now the breaker on the inverter...
Recommend (1) open the inverter (with battery power disconnected) - and inspect incoming cable between the power switch and the battery cable entrance. Possible that a wire overheated and shorted on the input cable.
Next (2) if problem cannot be located, go to http://search.harborfreight.com/cpisearch/web/search.do?keyword=inverter and replace it with at 2000 watt inverter for 130 bucks.
Read full answer
Dec 29, 2009 • Electronics - Others
0helpful
4answers

My speedometer on my 2000 yamaha r6 doesnt work
broken cable if your style bike has that style system, the cable that attaches to the axle shired off, i"ve had that stripped out also before and had to replace it.
Read full answer
Oct 05, 2009 • 2000 Yamaha YZF-R6
0helpful
1answer

2000 Jeep Grand cherokee Laredo wont start. Engine turn over . No noise from fuel pump with ignition on. Replaced fuel pump and filter.Turn ignition on- pump did not run.Jumped the fuel pump at the pump...
sounds alot the the pcm it controls the fuel pump and ign system but the anti theft would keep it from starting because the key has a transponder in it programmed for that vehicle and that would kill all ign if triggered
Read full answer
Sep 22, 2009 • 2000 Jeep Grand Cherokee
0helpful
1answer

1999 malibu guage cluster not working after a spark from jumping car. Replaced ignition key assembly, replaced guage cluster, checked all fuses.....still nothing. lights work, but the guages are frozen.
Unhook the battery hold the wires together for about 3 min, this should reset the cpu that runs the car. If that doesn't work check for a blown ground somewhere. Or you could have fried the guages, possible, but not likely. Don't forget to vote.
Read full answer
Apr 21, 2009 • 1999 Chevrolet Malibu
Not finding what you are looking for?

View Most Popular

2000 YZF-R6

  • Motorcycles

Related Question

I replaced fuse for interior lamps 10amps with a 25...i smelt the burn after drving home bout 7 miles .tried to restart my caddy now it wont start

  • 1999 Cadillac DeVille

Related Topics

94 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do you set the timing on a yamaha warrior 350

2000 Yamaha YZF-R6

R6 ECU reset on yamaha

2006 Yamaha YZF-R6

How do i remove battery from 2008 yamaha r6

2007 Yamaha YZF-R6

Remove the seat

2008 Yamaha YZF-R6

My 2005 YZF-R6 is sputtering and has a lack of

2005 Yamaha YZF-R6

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...