It should be located on the same side as where your oil filter is ,, look around near where your oil filter is and you should see a oil sensor that is screwed into your engine block ,,, if you have any problems with that give me an e-mail at [email protected]
SOURCE: vacumm hose diagram for 1987 honda accord
You did not clarify which motor you have. Here are both diagrams.
The fuel injected model:
And the carb model:
Testimonial: "Guru this is amazing I have to ask where did you find this I have been on the web for days and just couldn't find one till now --I bow down God Bless"
SOURCE: TCU
the tcu is on the right ( passenger) side footwell, under the carpet..the carpet has velcro tabs on it that will allow it to be pulled back...once the carpet is back there is a metal cover over the computers that is held on with 4 10mm bolts..take them out and you can remove the tcu!
SOURCE: location of oil filter
Rear of motor under intake manifold acessable from under vehicle between fire wall and engine.
SOURCE: No vacuum hose routing diagram under the hood 1987 honda accord
email me at [email protected]
I will send u it
SOURCE: location of the oil pressure sending unit 1994
The oil pressure sender is above or below the oil filter, threaded into the side of the engine block.
Hope this helps you.
167 views
Usually answered in minutes!
×