How do you chang eht headlamp bulb
Instructions
3
SOURCE: How do I change the light bulb on the gear selector on the
Its a fuse not the light bulb itself....
SOURCE: how do I change oil filter in a 2008 v6 rav 4
pull the plug on the oil pan as its draining take off the filter which should be on the upper end of the motor you may need a hose to put on the bottom of the oil filter base and there should be a little nipple for the hose
SOURCE: not getting fuel to my rav 4 1996
Filter should be on drivers side of passenger side of car directly between the doors. To change shut off fuel pump relay switch in trunk, remove the clips and change the filter.
SOURCE: Easiest way to change a fuel pump oa a 1999 toyota
Hello mm500539: My name is Roger and I will help. To locate the fuel pump you will need to remove the left rear seat. Remove the carpet. Remove the access cover in the floor pan. Drain off the fuel pressure as it should be under pressure. Do not expose to any spark or flame. Remove the screws holding the fuel pump unit in the fuel tank. Change the pump and reverse the procedure the reinstall the unit. Should you need further help please just ask. Please rate the answer you received as this way i know it was helpful. Thank You for using Fix Ya. Roger
SOURCE: 1999 toyota rav 4 engine oil cooler bolt torque setting
INSTALL OIL COOLER
-clean the oil cooler contact surface on the oil cooled mounting
-install a new O-ring to the oil cooler.
-temporarily install the oil cooler with the nut
-apply a light coat of engine oi on the threads and under the head of the relief vale
-install the plate washer and union bolt. torque 78Nm (800kgfcm, 58 ft lbs.)
-tighten the nut,torque 8.8Nm (90kgfcm, 78 inch lbs.)
-connect the 2 water bypass hoses to the oil cooler.
HOPE THIS CAN HELP.
Testimonial: "Great work thanks for the info."
1,510 views
Usually answered in minutes!
×