Hi now power, wanted to try and replace the fuse. Do you know where it's located?
SOURCE: Hi- I've got a Danby ddw1899bls
Hello, welcome to FixYa.
I understand by reading your post which indicates it is a Danby dishwasher you appear to have a error E1 concern.
On the Danby built dishwashers the E1 indicates a water filling fault...usually because it isn't filling properly or at all.
**unplug the unit or turn off the circuit breaker (mains) before performing any repairs or service...safety first**
Check to make sure the water supply is turned "on", if so...the inlet valve is likely plugged with mineral deposit or faulty and needing to be changed. You can fist turn the water off, unhook the supply line and make sure the screen is clear, if it is and it is being energized (you should hear a slight buzz) that indicates a bad vlave.
Let me know if you require further assistance. I'll watch for your reply and try and help going forward. Good luck and thank you for choosing FixYa.
Regards,
Macmarkus :)
233 views
Usually answered in minutes!
×