On back of the truck in the bed wall are 2 or 3 bolts to take out and the whole lens will come out.
You can then access the light bulbs. Good luck.
I did that but there were two plastic guides holding it in ... I had to slightly tap the bottom of the assembly to the left to work the guides loose ... then I was able to pull the assembly to the rear and unscrew the bulb holder, replace the burned out bulb, and then replace the assembly .... wow a lot of work to simply replace a bulb ...at least this time .... will go easier next time ... Thanks! :)
×
224 views
Usually answered in minutes!
I did that but there were two plastic guides that were holding it in. I was finally able to pull the tail light assembly out and access the bulbs to replace one. I had to tap it slightly to the left at the bottom to work it loose and then it slid out to the rear of the truck wall. :)
×