Question about 2005 Chevrolet Uplander

Open Question

Radio says CAT Interup Alert -- won't do anything if buttons are pushed - no sound -- DVD plays, but no sound

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: When playing a DVD the

Make sure the headphones are powered off. If you press the CD/AUX button twice the headphone symbol should disappear and it will play through the car speakers.

Posted on Feb 25, 2009

chargerhp
  • 813 Answers

SOURCE: My 04 pacifica radio, heater, dvd won't play, no

Check your relays the accessory relay right hand upper corner and the run relay middle left side if they are the same relay switch them and see if that works if not could be the body control module. Realys under hood to the right of the battery

Posted on Nov 22, 2011

  • 15441 Answers

SOURCE: 05 malibu classic no radio sound sometimes

The bcm controls that device for the addition of features like blue tooth and hands free, on-star etc.

Posted on Apr 21, 2014

  • 81 Answers

SOURCE: radio sound sometimes and not

IF the speakers are in the doors then the wiring harness in the door-jam is frayed, and you must cut the rubber to access the wires between the door and the door jam to get at the wires without taking the door apart.

Posted on Apr 21, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 malibu classic no radio sound sometimes


The bcm controls that device for the addition of features like blue tooth and hands free, on-star etc.

Apr 21, 2014 | Chevrolet Malibu Classic Cars & Trucks

1 Answer

Radio sound sometimes and not


IF the speakers are in the doors then the wiring harness in the door-jam is frayed, and you must cut the rubber to access the wires between the door and the door jam to get at the wires without taking the door apart.

Apr 21, 2014 | 2004 Chevrolet Impala

1 Answer

2009 dodge caravan radio locked


power interup, will need to reset code for radio

Sep 19, 2012 | 2006 Dodge Caravan SXT

1 Answer

The radio/stereo system on my 2001 cabrio convertible doesn't work. I turn the power on and it says "Safe" and then won't play any music. It was working just the other day though, and i...


IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio gamma programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Aug 08, 2011 | 2001 Volkswagen Cabrio

3 Answers

My radio/CD player constantly says "ERR" and CD's won't play anymore. It doesn't show the time or the radio station either, just "ERR". I can hear it, like it's trying...


HI lisasmith566 IT is not a fuse problem .
the problem is your the CD part of the radio
must likely the cd is stock or more likely the cd drive motor is defective .
FIRST try pushing eject on radio and see CD comes out if not you need a new radio .

good luck vote

Jul 27, 2011 | 2003 Chevrolet Tracker

1 Answer

When I go to turn on the radio it just reads "safe" and won't work or play anything. AT first i thought it was a battery issue but the battery has been charged and works great yet the radio...


IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of Audi radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Jun 07, 2011 | 1988 Audi 80

2 Answers

Tv or dvd player


Make sure that your dvd is electrically connected to your car. All you got to do is put it on by pressing the power button of the DVD. Then, press the dvd loading button open. Place the dvd on the loading tray, and push the button to close to load the dvd. Then press the triangle sign on the DVD to let it play. Then, you can press the volume to your preffered sound level.

Sep 21, 2009 | Cars & Trucks

2 Answers

2005 chev uplander dvd player


I have a 2007 montana sv6 and want to put a factory dvd player out of a 2006 montana in my 2007 my question is are the wires in the roof from factory and were do I cut the head liner

Sep 05, 2008 | 2005 Chevrolet Uplander

1 Answer

When playing a DVD the owner manual says to push the CD/Aux button on the radio to get the DVD sound to play through the cars speakers. This doesn't work. We can only get the DVD sound to come through...


Make sure the headphones are powered off. If you press the CD/AUX button twice the headphone symbol should disappear and it will play through the car speakers.

Jul 30, 2008 | 2006 Pontiac Montana SV6

Not finding what you are looking for?
2005 Chevrolet Uplander Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...