Question about 2004 Chevrolet Aveo

2 Answers

2004 Aveo roaring noise from front and rear wheels that increase with vehicle speed. It stops during left hand turns then return when going straight. No change to noise when turning right. I think it may be wheel bearing. How do you replace the bearing?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 224 Answers

Wheel bearing or cv joint . remove brake caleber remove spindel nut outer bearing comes out easy inter bearing is is a little harder

Posted on Sep 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 6 Answers

Take steering knuckle off. Place knuckle between wood blocks.Use a right sized socket to pound out the hub from the knuckle. Use a right sized socket to pound out the bearing from the knuckle. New bearing comes as a complete unit housed in a 2" bearing race shell with a inner and outer roller bearing and a grease seal at both ends. The roller bearing can actually be pulled from the shell. When installed, the cv axle washer and nut will tighten the bearing together so it won't come apart. Nut torque is 221 ft lbs.

Posted on Jan 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be causing a vibrating noise when going slow speeds but decreases when in faster speeds


Hi Chris, I'm glad to help! Vibrating / Roaring sounds can be anything from rear or front diff problems. Drive Line U-Joint problem. Wheel bearing bad. Even transmission problem. You have to pin-point where the vibration is, is it in the front, in the rear, on the right or on the left. Is it in the center of the vehicle and so on. Hope this helps and have an awesome day Chris!

Jan 04, 2014 | 2007 Jeep Liberty

1 Answer

Outlander howling noise in front wheels


with the wheel bearings failure , it is very possible that the "U" joint or cv joints for the front drive were damaged
I would be looking in that area especially as you mention on turning right

Mar 15, 2017 | Cars & Trucks

2 Answers

My toyota corolla 2005makes loud roar noise. not as bad at 65mph. when turn to the left it no loud


If it isn't the tire and it changes when you turn, I would suspect the wheel bearings.

Dec 15, 2012 | 2005 Toyota Corolla

1 Answer

Whenever I drive I continue to hear a loud roaring noise. Is this wheel bearing problem or is it something else


Quite often it is a bad wheel bearing, a lot of chevy's are notorious for them. A wheel bearing will usually create a growling type noise that is more prominent at around 40-60MPH. If its a wheel bearing you should notice a change in pitch when turning in one direction, for example if you have a bad right side wheel bearing it will be noisy driving straight ahead, then get louder when turning LEFT. If you turn right the noise softens. The weight distribution of the front end will be greater on the right side when turning left. Of course the works in the opposite direction. If the noise remains constant going straight and turning it could be a bad tire. Visually check the tire for pressure and bulges in the side wall. You didn't mention what type or model vehicle you have, because in some cases the rear wheel bearing could be causing the noise.

Feb 24, 2011 | Chevrolet Impala Cars & Trucks

1 Answer

2001 toyota corolla I have a loud roaring seens like it from the right front wheel.


THIS NOISE IS CAUSED BY A POSSIBLE WHEEL BEARING
WHEN YOU DRIVE THE VEHICLE YOU SHOULD HEAR A ROARING NOISE AND AS YOU GO FASTER THE NOISE WILL GET LOUDER AND WHEN YOU TURN THE WHEEL FROM SIDE TO SIDE THE NOISE WILL FADE IN AND OUT. THIS IS AN INDICATION THAT THE WHEEL BEARING IS BAD.
ALSO ANOTHER WAY WOULD BE TO JACK UP THE FRONT OF THE VEHICLE, BLOCK OFF THE REAR WHEELS SO THE CAR DOES NOT ROLL BACK ON YOU, THEN PUT THE CAR IN NEUTRAL AND GO TO THE WHEEL PUT YOUR HAND ON THE STRUT BASE AND SPIN THE TIRE WITH YOUR OTHER HAND YOU SHOULD FEEL A GRINDING NOISE. IF SO THE WHEEL BEARING ON THAT PARTICULAR SIDE IS BAD AND IT NEEDS TO BE CHANGED

Jan 12, 2011 | 2001 Toyota Corolla

1 Answer

Right front wheel howls on 2000 Accord EX


are your front right brake pads worn more than your front left? if so probable cause is the rotor. if not, most likely wheel bearing

Oct 07, 2009 | 1996 Honda Accord

1 Answer

Wheel noise or roar in front end with increased road speed


THIS NOISE IS USUALLY THE HUB. HAVE SOMEONE GO WITH YOU ON A TEST DRIVE. GET THE ROARING TO HAPPEN AT ITS LOUDEST AND GENTLY SWERVE THE CAR LEFT AND RIGHT. DON'T BE SURPRISED IF YOU THINK BOTH HUBS ARE BAD. LIFT THE FRONT OF THE CAR AND PUT IT ON JACK STANDS. PULL OUTWARD ON THE BOTTOM OF THE TIRE WHILE PUSHING INWARD ON THE TOP OF THE WHEEL. IF THE WHEEL MOVES EXCESSIVELY YOU FOUND THE HUB THAT IS NOISY. USING A MECHANICS STETHOSCOPE YOU CAN SOMETIMES HEAR A ROARING TYPE NOISE ON THE BACKING PLATE SIDE OF THE HUB WITH THE ENGINE RUNNING AND THE TRANS IN GEAR. TRY NOT TO GET THE SPEED UP TOO FAR ESPECIALLY IF YOU CAN HEAR THE NOISE AT LOW SPEED, YOU DON'T WANT TO VIBRATE OFF THE STANDS.

Jun 15, 2009 | 2000 Buick LeSabre

1 Answer

"Humming" or "bearing" type noise in left front at highway speeds


That's a hub bearing. Replace the one that's doing it. I'm assuming this 'roar' is coming from the front, NOT the rear.

Jun 10, 2009 | 2001 Hyundai Elantra

1 Answer

Roar in right front when making right turn


Sounds like your wheel bearing is going if no other noises present when braking

May 05, 2009 | 2004 Kia Sedona

1 Answer

Front End Problems


first i would check the tires , are they cupped or chopped on the tread? run your hand over the tread and see if it feels rough and uneven. take the truck to a auto repair shop and have them jack both front and rear axles off the ground, put the truck in 2 wheel drive and run the speedometer to the speed you usually hear the roaring noise, if you don't hear the noise , put the truck in 4 wheel drive, turn off the traction assist if it has one and run it to the speed you would hear the noise. if you hear the roaring noise with tires off the ground, the problem is in the drivetrain, (engine, transmission, transfer case, u-joints, differentials or the front left or right cv halfshafts or u-joints). the older models (97 98) had the front two driveshafts from the differential turning all the time, they engaged in 4 wheel drive from the transfer case and a solenoid on the front differential. depending on the miles you have on this truck, the most likely areas i would look at would be the tires, u-joints/cv joints, and front and rear wheel bearings. thanks and good luck.

Oct 04, 2008 | 2004 Dodge Ram

Not finding what you are looking for?
2004 Chevrolet Aveo Logo

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...