Chrysler grand voyager 56reg error code P0891 TCM Power Relay Sense Circuit High, have garage dry out the unit as was wet and check earth clear code and then comes back at 20mph stick in limp mod HELP

SOURCE: limp mode on chrysler grand voyager 3.3 le auto.

If it's in limp mode, the check engine light is on steady, or blinking, or a combination of the two. You need to have trouble codes read, most parts stores offer this as a free service. They will plug a hand held scan tool into the vans diagnostic port under the dash, and 'read' codes stored in the computer. They can explain what they mean, and make recommendations on what to do to fix it. If you have any questions after that, post them here with the code #'s.

SOURCE: 2005 chrysler grand voyager - three problems - 1 -

catherine223
1- needs revving to start the car in the morning?
ans- when you start the car, press full the exilator. don't remove the leg from exilator and start the car.

2- battery goes flat a lot?
ans- change the battery in good quality and change from the company of car.

3 - power cuts out when driving which is really dangerous?
ans- check the car from car-electricion, you may found satisfy result.

Below my contcact mail id, if you got the way out.contcact me,thanx.
([email protected])

SOURCE: transmission problem with 2001Chrysler Grand Voyager limited

P0700------- Transmission control system malfunction. 10 to 1 the control unit needs replacing.

SOURCE: Have a Jeep Grand Cherokee

The issue, then, may be with the OBD or ECM itself.

Thanks!

SOURCE: limp mode

Hi Mary, You have not told us the vehicle make or model, or basically anything we can use to determine what fault it may have. Take your vehicle to a reputable garage and ask them to carry out a diagnostic scan. Regards John