Camshaft Sensor
Follow this URL for picture:_
http://alldatapro.com/alldata/PRO~V416324719~C30660~R0~OB0~P3R0H~N/0/41746052/42417623/42417638/42422763/34853741/34857029/34857030/101366976/14461280/42437587/41882479
REMOVE OR DISCONNECT
INSTALL OR CONNECT
SOURCE: 2002 Chevy Trailblazer Engine Codes
This is actually an easy swap out. Remove the electrical connection, remove the retaining bolt and pull out old one. I believe the sensor is located in the front passenger side of the engine on this particular model.
SOURCE: location of cam positioning sensor for 1991 chev lumina 3.1
On your 1992 Chevrolet Lumina-Sedan/Coupe 3.1L MFI OHV , the Crankshaft Position Sensor is located: Under hood, passenger side, lower engine area, passenger side of engine block, mounted front of crankshaft pulley
SOURCE: Where is the camshaft position sensor located-99 Chevy Lumina 3.1
It's held down by one bolt right above the timing chain cover. It's next to the head that's facing toward the front of the car.
SOURCE: firing order and camshaft sensor for a 96 chevy lumina 3.1 v6
Here is a diagram of your motor with the firing order:
SOURCE: how to remove a starter on 1993 chevy lumina?
Support the car very securely first of all
Remove the negative cable from the battery
Remove the wires from the starter
Remove the two bolts from the starter going upward to the engine block
Wiggle the starter out
Reverse this proceedure to reinstall
777 views
Usually answered in minutes!
×