Question about 1992 Chevrolet Lumina

1 Answer

Location of cam positioning sensor for 1991 chev lumina 3.1

Do you have a picture of location for the cam positioning sensor

Posted by delko on

  • 9 more comments 
  • Anonymous Mar 19, 2014

    1991 chev lumina will not start if its cold outside

  • Anonymous Mar 19, 2014

    1991 chev lumina will not start if its cold outside

  • Anonymous Mar 19, 2014

    1991 chev lumina will not start if its cold outside

  • Anonymous Mar 19, 2014

    1991 chev lumina will not start if its cold outside and if its a censor would it be beside the motor

  • Anonymous Mar 19, 2014

    No but it's a 2 5 motor chev lumina 1991

  • Anonymous Mar 19, 2014

    Where is censor located at for chev lumina 1991 when it won't start when cold outside

  • Anonymous Mar 19, 2014

    Where is censor located at for chev lumina 1991 when it won't start when cold outside is it behide motor

  • Anonymous Mar 19, 2014

    1991 chev lumina problems with censors

  • Anonymous Mar 19, 2014

    Having problems with a 1991 chev lumina

  • Anonymous Mar 19, 2014

    pictures of location

  • Anonymous Mar 22, 2014

    fix

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 251 Answers

On your 1992 Chevrolet Lumina-Sedan/Coupe 3.1L MFI OHV , the Crankshaft Position Sensor is located: location of cam positioning sensor for 1991 chev l - clearpixel.gif Under hood, passenger side, lower engine area, passenger side of engine block, mounted front of crankshaft pulley

Posted on Nov 30, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cant found the cam position sensor of isuzu trooper 3.2l v6 6vd1 engine


on the drivers side head on the rear of the engine, behind the intake manifold. its kinda hidden beneath a heater hose. check out user steve hurc. he has put some pictures on where to find it on fixya

Nov 26, 2014 | Isuzu Trooper Cars & Trucks

1 Answer

Need to know how many sensor. is on my transmission.. 2003 Pontiac Montana v 6 .. can you show me picture where transmission control solenoid goes?


There are 12 common sensors and 10 internal sensors. The most common that often fail (MAP), (TPS), (CAM), (IGN), (CRANK) MAP is your mass air flow which is located at the beginning of your air intake, TPS is the throttle body position sensor, the CAM is the cam shaft position sensor (transmission), IGN ignition position sensor and the CRANK sensor is located near the bottom driver side front

Oct 26, 2013 | 2003 Pontiac Montana

2 Answers

The camshaft position sensor is bad but I don't know where it is located or how to change it


it depends on the vehicle. and you did not say what type of vehicle. most general motors C/S sensors are located at the front of the engine above the timing chain cover . some are located on the Rt. sice of the cylinder head

Apr 18, 2013 | Cars & Trucks

1 Answer

Where is the cam sensor located on the 2001 Hyundai Santa Fe


http://www.youtube.com/watch?v=5gwta1NvtsQ


This may help

Feb 28, 2013 | 2001 Hyundai Santa Fe

1 Answer

2001 dodge 3500 van cam position sensor location


Crank sensor is in the bell housing of the transmission. Cam sensor is in the distributor.

Jul 25, 2010 | 2001 Dodge Ram 3500 Truck

1 Answer

Location of cam sensor 2003 jeep grand cherokee v8


Answer
pic_12.gif
pic
REMOVAL - 4.7L
The Camshaft Position Sensor (CMP) on the 4.7L V–8 engine is bolted to the front/top of the right cylinder head (CMP Location—4.7L Engine).

It is easier to remove/install sensor from under vehicle.

Raise and support vehicle.
Disconnect electrical connector at CMP sensor (CMP Location—4.7L Engine).
Remove sensor mounting bolt (CMP Location—4.7L Engine).
Carefully twist sensor from cylinder head.
Check condition of sensor o-ring.
See picture for sensor location.


9347d80.gif

Jul 21, 2010 | 2003 Jeep Grand Cherokee

2 Answers

2005 ford excursion cam sensor location I need to change the cam sensor and the crank sensors on my excursion and i do not know where they are located


On my 02 Excursion with the 7.3L Diesel, the Cam Position Sensor is located at the front bottom of the engine on the passengers side. There is one electrical pigtail plug that is attached and one bolt holds the sensor in position. It may be located in a similar location on your 05 Ex. I do not know where the crank sensor is located. I hope this helps.

Aug 27, 2009 | 2005 Ford Excursion

1 Answer

Cam Shaft Position Sensor 1998 Saturn SL


Have a look at this link, scroll to your engine & click on picture to expand for better view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528017e904

Jan 23, 2009 | 1998 Saturn SL

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

855 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23590 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...